standalone plugins and sound card
-
Dear David, let’s suppose instead that I have a standalone app (i.e. Neural DSP plugins, Amplitube, Scuffham “S-GEAR”, Nembrini Audio etc…) and, therefore, I will not use a DAW but only a simple standalone app: let’s suppose that this app uses both the input and output of my duet 2 sound card (“in” to which I connect the guitar, “out” to which I connect my studio monitors): what will I assign to the FarPlay microphone? Duet or Duet+Black Hole?
Thank you for your previous kind replies
Tony
-
Hi Tony, In the standalone app, keep the Duet as your input, and switch the output from your Duet to BlackHole. In FarPlay, choose BlackHole as your microphone, and choose your Duet as your headphones. (I prefer to send the audio output from FarPlay directly to the audio interface, instead of through a virtual sound card to another app, to avoid some latency).
If you want to use a mic that isn’t plugged into your Duet as a talkback mic, create an aggregate audio device that uses BlackHole and your talkback mic for inputs, and select this aggregate device as the microphone in FarPlay.
Hi David, up to now I have carried out the tests remotely with two of my friends who have a Mac mini and do not have a webcam or microphone: consequently the interpersonal communication was carried out via WhatsApp, while for the instrumental part the system worked I described in previous emails.
As far as my equipment is concerned, it consists of:
Imac 27 inches mid 2011 on OS High Sierra – Apogee Duet 2 –
I connect my guitar directly to the sound card so I have no problems with microphone feedback, I can use monitors and I don’t need headphones: until now due to the limited equipment of my partners I haven’t had the opportunity to test the functionality of the microphone and webcam integrated into the Mac…but certainly in the future there may be a problem of aggregate management of these two components integrated into the Mac with the external sound card.From this perspective, in the “audio midi” configuration of the Mac I tried to create some alternative solutions as shown in the attached screenshots:
1) Duet USB in & out – setup I currently use and it works;
2) only Black Hole output: with this configuration I lose the audio (nothing reaches the monitors) and nothing reaches the FarPlay microphone;
3) Configuration carried out with a view to using the integrated microphone (for communicating) together with the external sound card (for playing)…;
4)Configuration in which I try to combine Duet 2 and Black Hole on output;
5) These are the solutions offered for the FarPlay microphone….this is the last screenshot…
Attachments:
…for completeness I attach the screen shot of the audio preferences in out of one of my standalone plugins
Attachments:
…
Attachments:
Hi Tony, Thank you for the screenshots. To be clear, when you’re trying your strategy # 2 (trying to get audio from your standalone app through BlackHole to FarPlay), you need to select BlackHole as the microphone in FarPlay (in your screenshot, copied below, you have Duet USB selected as the microphone in FarPlay).
With these settings, if you’d like to hear your local audio more easily, you’d probably want to raise your local monitor level (-13 dB in your screenshot).
I think I have solved the problem: as you can see in screenshot 2, the black hole master stream bar is minus 49.14 db:
raising the level to around -6db the signal became audible and was detected by the FarPlay monitor… I don’t know if I followed the correct procedure but it seems to work now…Attachments:
- You must be logged in to reply to this topic.